 |
|
|
|
|
|
ICompact in design, the sophisticated IC-FR4100
repeater radio product will instantaneously retransmit
received audio without any noticeable delay and
extend the operating range of a radio scheme even
further. Designed to enhance coverage of a two-way
radio system, the IC-FR4100 can be added to an
existing radio system.
The IC-FR4100 for on-site systems incorporates
a large heat sink, cooling fan and high performance
power amplifier, the repeater provides a stable
25W of output power allowing a radio scheme to
be boosted beyond the range of normal Private
Mobile Radio (PMR) networks.
|
| WHY USE IT? |
- Clear Concise
Communication
The repeater has 32 memory channels. Each memory
channel can store a 10-character channel name,
wide/narrow (25/12.5 kHz) channel spacing, repeater/base
operation etc, as well as frequency settings.
Each channel has a maximum 16 Receive and Transmit
CTCSS and DTCS tone memories that are freely
programmable. These memories allow multiple
groups to share a single channel
- Programmable key
assign function
The following functions can be assigned to the
[PROG] button.
- Priority A
- Priority A (Rewrite)
- Display select
- Locko High/Low
- Wide/Narrowo Call
- Call A, B (PMR mode only)
- Emergency Single
- Emergency Repeat
- Scrambler
- Special Function 1, 2
- Null
- Single Source
for integrated solutions
Signalling such as CTCSS, DTCS, DTMF and 5-tones,
2-tones encoder/decoder are standard. All signalling
are fully programmable. The IC-FR4100 is also
compatible with Icom's F series mobile and handheld
transceivers allowing you to construct a total
Icom PMR system. And the IC-FR4100 has D-SUB
25 pin/modular interfaces for external controllers
such as PassPort® and MPT1327
- Telephone line
connector
The IC-FR4100 repeater has a 4-pin modular connector
allowing telephone interconnection
|
| FEATURES |
| Contents |
- IC-FR4100 Radio Repeater
- DC Power Cable
- User Guide
|
| Features |
- Full Duty Operation with built-in
AC power supply unit
- Wall or Rack Mounting possible
- Most signalling codes are standard
(such as CTCSS, DTCS, DTMF and 5-tones/2-tones
encoder/decoder)
- Compatible with Trunking systems
- Internal Space for Duplexer and Isolator,
protecting from strong adjacent signals and
reducing intermodulation
- Telephone line connector
- 32 memory channels - each memory can
store a 10-character name and other information
- 16-digit display
- Multiple CTCSS/DTCS tone memories
- Built-in 2-Tone, 5-Tone, DTMF encoder
and decoder
- ID Transmission Function
- 5-Tone relay function
- 2-Tone/5-Tone auto TX function, allowing
you to listen to activity near the repeater
- Back-Up functions with automatic alert
function
- Optional Voice Scrambler Unit
- Programmable Key Assign Function
|
| Size &
Weight |
|
| Band |
|
| Channels |
- 128 or 16 ch × 8 banks
- 256 or 16 ch × 16 banks; with EX-1761
|
| Operating
Temperature Range |
|
| PLL Channel
Step |
- 5 kHz, 6.25 kHz and 7.5 kHz
|
| Type of Emission |
- 8K50F3E (12.5 kHz; narrow)
- 16K0F3E (25 kHz; wide)
|
| Power Source |
- The repeater has a built-in 240V power supply
unit. For back up the repeater can be connected
to an external battery, the repeater will automatically
change the power source if the AC power fails
|
|
|
|
|
|
|
|
|
